Glove sourcing guides
EN 388 Explained: How to Read Glove Ratings for Abrasion, Cut, Tear and Puncture
Short answer: EN 388 is the European standard for gloves that protect against mechanical risks. The code under the hammer pictogram has four digits (abrasion, coupe cut, tear, puncture), then a letter A to F (cut, tested to EN ISO 13997) and an optional P (impact protection). Higher means more protection; X means not tested or not applicable.
How to read the code
Example: 4X43D P
| Position | Property | Example | Meaning |
|---|---|---|---|
| 1 | Abrasion resistance | 4 | Highest abrasion level |
| 2 | Cut resistance, coupe test | X | Not tested or not applicable |
| 3 | Tear resistance | 4 | Highest tear level |
| 4 | Puncture resistance | 3 | Level 3 of 4 |
| 5 | Cut resistance, EN ISO 13997 (TDM) | D | Level D of A to F |
| 6 | Impact protection (optional) | P | Passed the impact test |
Performance levels
| Test | Level 1 | Level 2 | Level 3 | Level 4 | Level 5 |
|---|---|---|---|---|---|
| Abrasion (cycles) | 100 | 500 | 2,000 | 8,000 | – |
| Coupe cut (index) | 1.2 | 2.5 | 5.0 | 10.0 | 20.0 |
| Tear (newtons) | 10 | 25 | 50 | 75 | – |
| Puncture (newtons) | 20 | 60 | 100 | 150 | – |
| EN ISO 13997 cut level | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| Minimum force (newtons) | 2 | 5 | 10 | 15 | 22 | 30 |
The values are the minimum a glove must reach for each level.
Why the coupe digit is often X
The coupe test uses a rotating circular blade. Many high-cut materials (for example those with glass or steel fibres) blunt the blade, which makes the coupe result unreliable. In that case the EN ISO 13997 straight-blade result (the letter) is the reference cut result, and the coupe digit may be shown as X. For cut-resistant gloves, read the letter first.
EN 388 vs ANSI/ISEA 105 cut levels
In North America, cut resistance is usually stated as ANSI/ISEA 105 levels A1 to A9, measured in grams on a TDM machine:
| ANSI level | A1 | A2 | A3 | A4 | A5 | A6 | A7 | A8 | A9 |
|---|---|---|---|---|---|---|---|---|---|
| Grams (min.) | 200 | 500 | 1,000 | 1,500 | 2,200 | 3,000 | 4,000 | 5,000 | 6,000 |
The EN and ANSI scales use similar machines but different units and thresholds, so do not convert one into the other on a label: test to the standard of the market where the glove is sold.
What this means for a brand
- EN 388 is tested on a specific glove design and material. A factory certificate (for example ISO 9001) does not replace the product test.
- Decide the target levels at the brief stage: they decide the materials, and the materials decide the price.
- In the EU and UK, protective gloves are PPE: the EN 388 rating sits alongside the general glove requirements of EN ISO 21420 and the PPE rules for your market.
QST Gloves makes protective gloves to the standard your market requires: tell us the levels you need and we confirm materials and testing per design. See also our certifications.
Sources
- SATRA: EN 388:2016 + A1:2018
- ANSI blog: ANSI/ISEA 105 hand protection classification
- ATG Glove Solutions: ANSI/ISEA 105-2016 cut
Questions
What does X mean on an EN 388 glove?
X means the glove was not tested for that property, or the test does not apply to it. On cut-resistant gloves the coupe cut digit is often X because the EN ISO 13997 letter is the reference result.
What is the highest EN 388 cut level?
On the EN ISO 13997 scale the highest level is F, at 30 newtons or more. On the coupe scale the highest level is 5.
Is EN 388 the same as ANSI cut level?
No. ANSI/ISEA 105 uses levels A1 to A9 in grams; EN 388 uses letters A to F in newtons. Test to the standard of the market where the glove is sold.
Making gloves under your brand? Send the glove type, quantity, your tech pack or a reference photo, and the date you need them. Minimum order 25 pieces.