Glove sourcing guides
Glove Size Chart for Brands: Hand Measurements by Size (EN ISO 21420)
Short answer: EN ISO 21420 sizes gloves by hand circumference and hand length. Size 8 (M) fits a hand of about 203 mm around and 182 mm long; each size up adds roughly 25 mm in circumference and about 10 mm in length. Sizes 6 to 11 (XS to XXL) are in the standard.
Glove size chart
| Size | Letter | Hand circumference | Hand length |
|---|---|---|---|
| 6 | XS | 152 mm | 160 mm |
| 7 | S | 178 mm | 171 mm |
| 8 | M | 203 mm | 182 mm |
| 9 | L | 229 mm | 192 mm |
| 10 | XL | 254 mm | 204 mm |
| 11 | XXL | 279 mm | 215 mm |
Smaller and larger sizes (for example youth sizes or 3XL) are not part of the EN ISO 21420 table; brands set them with their own fit samples.
How to measure a hand
- Circumference: wrap a tape around the palm, just below the knuckles, without the thumb.
- Length: measure from the tip of the middle finger to the crease where the wrist meets the hand.
- Use the larger of the two results to pick the size.
Why the chart is a starting point, not the fit
Two gloves in the same size can fit differently: a batting glove is cut close for feel, a winter work glove has room for a lining, a goalkeeper glove may use a roll or negative cut. Build your own size chart on the approved fit sample and give it to the factory with the garment measurements of the glove itself (palm width, length, finger lengths, cuff).
Planning the size split of an order
- Use your own sales data by size if you have it; it beats any rule of thumb.
- For a new adult range, most brands concentrate on M and L and order fewer XS and XXL.
- Youth and women’s ranges need their own size runs, not just smaller adult sizes.
- Confirm the minimum quantity per size and colour with the factory. At QST Gloves the order minimum is 25 pieces.
QST Gloves makes sports gloves, protective gloves and baseball gloves to your size chart. Send it with your tech pack.
Sources
- Ejendals (TEGERA): glove size guide based on EN ISO 21420
- Wenaas: EN ISO 21420:2020 general requirements
Questions
What size glove is a medium?
A medium (size 8) fits a hand of about 203 mm (8 inches) around the palm and 182 mm long, from the tip of the middle finger to the wrist crease.
What replaced EN 420?
EN ISO 21420:2020 replaced EN 420 as the standard for general requirements of protective gloves, including sizing.
Making gloves under your brand? Send the glove type, quantity, your tech pack or a reference photo, and the date you need them. Minimum order 25 pieces.